Roofing, Cladding and Decking Panels

Roll Formed Sheets & Decking Panel

Fermos Engineering.'S Roofing, Wall Cladding & Decking Panels are made from high tensile steel. The use of high precision roll forming machines ensures that our products are of the highest quality.

Fermos Engineering. RW 1060-Roofing & Wall Cladding Sheet

This profile is commonly used for both roofing and wall cladding. This is a pierced, fixed Roof Sheeting system. Available in lengths of 3 to 12 meters.

Fermos Engineering. RW 1060-Roofing & Wall Cladding Sheet

This profile is mainly used for roofing as it has more strength as compared to the Fermos Engineering. RW 1060 profile. This is a pierced, fixed Roof Sheeting system. Available in lengths of 3 to 12 meters.

Fermos Engineering. W 1080-Wall Cladding

This profile is used only for Wall Claddings due to its very simple corrugation.This is a pierced, fixed wall cladding system. Available in lengths of 3 to 12 meters.

Color Chart
Fermos Engineering. KL 500 - Clip Lok System for Roofing

This is the arch roofing profile used to provide the aesthetic look to any building or structure without compromising with the required strength or the Necessities associated with any roof like hanging of lights, ventilation, use of gutters, etc. This profile gives you that arch roof with the use of Optimum engineering unlike other similar profiles available in the market.

Fermos Engineering. D 1060 - Decking Panel

Our Composite Floor Decking Panels are typically used for multi-story buildings, mezzanines, parking garages, etc. These Decking Panels ahave a Ribbed Profile with Embossments which are specially designed and roll formed to interlock with concrete slabs.

  • Our standard colours are available in PPGLfPre painted Galvalume) and PPGI (Pre Painted Galvanized) materral
  • Bare Galvalume sheets also available.
  • Available with Yield strength of 350MPa, 550 MPa and 750 MPa.